Additional Features; Buttons; Power; Reset - Congatec COM Express conga-MEVAL Manual

6

Additional Features

6.1

Buttons

The conga-MEVAL features the power, reset, LID and sleep buttons.
6.1.1

Power

In ATX mode, the COM Express module starts after the power-on button M19 is pressed.
6.1.2

Reset

When you press the reset button M16, it triggers the module's SYS_RESET# signal. The triggered event usually invokes a system warm reset.
This behavior however depends on the configuration of the module.
6.1.3

LID

When you press the lid button M17, it triggers the module's LID# signal. The system's behavior depends on the ACPI settings of the operating
system.
Copyright © 2022 congatec GmbH
M19
M16
M17
CET0m10 54/58