Advertisement
: '15/Aug.
1
21
21-1
Purpose
Setting
Function (Purpose) Used to set the maintenance cycle.
Section
Operation/Procedure
* Do not change the default setting value of the maintenance
counter on SIM21-1. The replacement timing of the fusing clean-
ing roller, the filter and PS paper dust removal cleaner may not
clarify.
1)
Select a target item of setting with scroll key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
Item/Display
1
A
MAINTENANCE
Maintenance
COUNTER
counter (Total)
(TOTAL)
22
22-1
Purpose
Adjustment/Setting/Operation data output/
Check
Function (Purpose) Used to check the print count value in each
section and each operation mode.
(Used to check the maintenance timing.)
Section
Operation/Procedure
Change the display page with scroll key on the touch panel.
Item
Display
Total
TOTAL OUT
output
quantity
Total use
TOTAL
quantity
Copy
COPY
Print
PRINT
Document
DOC FIL
filing
Other
OTHER
Setting
Default
Content
range
0:
26CPM: 75K
Default
31/35CPM:
1 - 300:
100K
1K - 300K
999: Free
Content
Total output
All prints including
quantity of black
jams
and white
Total use quantity
Effective paper
of black and white
(including self print,
excluding jams)
Black and white
Billing target
copy counter
(excluding self print)
Black and white
Billing target
print counter
(excluding self print)
Black and white
Billing target
document filing
(excluding self print)
print counter
Black and white
Self print quantity
other counter
MX-M316N SIMULATION 6 – 16
22-2
Purpose
Function (Purpose) Used to check the total number of misfeed
Section
Operation/Procedure
The paper jam, trouble counter value is displayed.
MACHINE JAM
RSPF JAM
TROUBLE
22-3
Purpose
Function (Purpose) Used to check misfeed positions and the
value
Section
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
22-4
Purpose
Function (Purpose) Used to check the trouble (self diag) his-
Section
Operation/Procedure
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
Adjustment/Setting/Operation data check
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
Machine JAM counter
RSPF JAM counter
Trouble counter
Adjustment/Setting/Operation data check
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
Adjustment/Setting/Operation data check
tory.
Advertisement
