Advertisement
26-3
Purpose
Setting
Function (Purpose) Used to set the specifications of the auditor.
(Setting must be made according to the
auditor use conditions.)
Section
Auditor
Operation/Procedure
Select an item to be set with the touch panel.
Item/Display
BUILT-IN
P10
AUDITOR
OUTSIDE
NONE
AUDITOR
P VENDOR1
P VENDOR3
P OTHER
VENDOR-EX
(*1)
VENDOR-EX
(MULTI) (*1)
S_VENDOR
DOC ADJ
ON
OFF
PF ADJ
ON
OFF
VENDOR
MODE1
MODE (*2)
MODE2
MODE3
Default
Content
value
Built-in auditor mode
(standard mode) operation.
No external connection
NONE
vendor is used.
Coin vendor mode
(Only the copy mode can
be controlled.)
Vendor mode in which
signals for the intercard
connected to the PCU are
used for communication in
parallel I/F.
Mode for an external
auditor connected to the
SCU.
Vendor I/F for EQUITRAC
VENDOR-EX + Multi job
cueing Enable mode
Serial vendor mode
Support for the auditor in
document filing print
No support for the auditor in
document filing print
Continuous printing is
performed in the duplex
print mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
Continuous printing is not
performed in the duplex
print mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back
surface.
Vendor mode 1
MODE
Vendor mode 2
Vendor mode 3
MX-M316N SIMULATION 6 – 26
Item/Display
COUNTUP
TIMING
P10
PRINTER
CONTROL
OFF
OFF
(*1) Displayed only when EQUITRAC.
(*2) Details of the vendor mode
Details of the vendor mode
Completion
remaining)
Condition 1
MODE1
Operation 1
MODE2
Operation 1
MODE3
Operation 1
Operation 1:
Standby during setting time of auto clear. Default is 60 seconds,
3
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
Content
FUSER_IN
Mode in which the detection
timing of the paper lead
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
FUSER_OUT
Mode in which the detection
timing of the paper rear
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
EXIT_OUT
Mode in which the detection
timing of the paper rear
edge by the paper exit
sensor of the right paper
exit tray or of the after
process unit is used as the
money charging timing.
MODE1
All the items in OUTSIDE
AUDITOR and VENDOR
MODE are allowed to
select.
MODE2
("OUTSIDE AUDITOR" is
always set to "P
VENDOR1". Other buttons
are grayed out.
"VENDOR MODE" is
always set to "MODE3".
Other buttons are grayed
out.)
MODE3
"OUTSIDE AUDITOR" is
always set to "P OTHER".
Other buttons are grayed
out.
"VENDOR MODE" is
always set to "MODE3".
Other buttons are grayed
out.
Insufficient money during
of the
copy job
specified
BW
quantity.
(no money
(Money
remaining)
remaining)
Condition 2
Condition 3
Operation 2
Operation 2
Operation 1
Operation 2
Operation 3
Operation 2
Default
value
EXIT_
OUT
MODE
1
Completion
of the
specified
BW
quantity.
(money
(No money
remaining)
Condition 4
Operation 1
Operation 1
Operation 3
Advertisement
