Advertisement
44
44-1
Purpose
Setting
Function (Purpose) Used to set each correction operation func-
tion in the image forming (process) section.
Section
Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
Operation/Procedure
1)
Select an item to be set with the touch panel.
(The selected item is highlighted.)
2)
Press [EXECUTE] key. (The set value is saved.)
CAUTION: Set the items to the default values unless a change is
specially required.
Item/Display
MD_VG
Membrane decrease (GB) Enable/Disable setting
MD_DV_LIFE
DV life correction (GB, DVB) Enable/Disable setting
MD_ENV
Environment correction (GB, DVB) Enable/Disable setting
MD_DUPLEX
Duplex print correction (GB, DVB) Enable/Disable setting
MD_LD
Membrane decrease life correction (laser power) Enable/Disable setting
MD_LD_ENV
Environment correction (laser power) Enable/Disable setting
TN_LIFE
Enable/Disable setting of the toner density life correction
TN_ENV
Enable/Disable setting of the toner density environment correction
TN_DUPLEX
Toner density duplex print correction Enable/Disable setting
TN_COV
Enable/Disable setting of the toner density print ratio correction
TN_AREA
Enable/Disable setting of the toner density area correction
TN_DRIP
Enable/Disable setting of the toner density correction unconditional supply
TC
Enable/Disable setting of the transfer output correction
44-9
Purpose
Operation data display
Function (Purpose) Used to display the result data of the high
density process control operation.
Section
Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
Operation/Procedure
Select a target display mode with [CPY/PRN], [OTHER] keys.
Content
MX-M316N SIMULATION 6 – 43
Setting range
Default value
Black text on
Enable
white
Enable
background
Enable
(Inhibit: 0=NO)
Enable
White text on
Enable
black
Enable
background
Enable
(Allow: 1=YES)
Enable
disable
Enable
Enable
Enable
Enable
NOTE
Advertisement
