Advertisement
B. Firmware update using FTP
FTP software is used to transfer the firmware data (extension ".sfu") from the PC to the machine. The controller recognizes the firmware identi-
fier and the machine automatically switches to firmware write mode. After the firmware is updated, the machine automatically resets.
Machine 1
10.36.112.83
Machine 2
10.36.101.52
C. Firmware update using the Web page
An Web browser (service technician's Web page) is used to update
the firmware.
1)
Start the Web browser on a PC and enter the specified URL. A
special firmware upgrade page appears.
2)
Click the "Update of Firmware" key in the Web page. Click the
[Browse] key and select the firmware for the update.
MX-XXXX
3)
After selecting the file, click the [Submit] key to send the firm-
ware to the machine. Update processing begins. While pro-
cessing takes place, "Firmware Update, now processing..."
appears.
Machine 3
10.36.112.84
Machine 4
10.36.101.53
MX-M316N FIRMWARE UPDATE 8 – 3
FTP Client
4)
When the firmware update is finished, "Firmware Update com-
pleted. Please reboot the MFP." appears. Pressing the
[Reboot] key, the machine will restart to complete the update.
The browser will shift to the following screen.
"Close the browser and open again to display latest informa-
tion." will be displayed.
5)
Check the firmware version of machine again.
Firmware.sfu
Advertisement
