Download Print this page

Sharp MX-M356N Service Manual page 185

Hide thumbs Also See for MX-M356N:

Advertisement

(2) Communication report sub code 1
The communication report sub code 1 (upper 2 digits) are always indicated as "00."
(3) Communication report sub code 2
Report code 2
00
When the conditions after 01 do not apply.
01
Send length over
02
EOL time up
03
Carrier detection time up
04
Time up of the communication start command from the machine side
05
Time up in phase C (8 min)
06
Memory image decode error
07
Memory image decode error
08
Time up between frames in phase C (Report code is 0 or 16.)
09
Not used
10
Not used
11
Polarity reversion detection
12
Invalid command reception
13
Time up (1-minute timer/6-second time)
14
PUT error
15
In V.34 mode, time up is generated when shifting from Primary to Control.
16
In V.34 mode, time up is generated when shifting from Control to Primary.
17
Command receive time-up from MFP controller
18
Not used
19
Not used
20
Polarity reversion detection
21
Invalid command reception
22
Fallback retry number over
23
Command retry number resend over
24
Time up (T5 timer)
25
Time up (T5 timer) in V.34 mode
26
In V.34 mode, time up is generated when shifting from Primary to Control.
27
In V.34 mode, time up is generated when shifting from Control to Primary.
28
When sending the FSK signal, no response of send completion is sent back from the MODEM chip within a certain time.
(V.34, other than V.34)
29
Not used
30
A communication error is generated between MFP controller and Modem controller. (Report code is 0 or 16.)
31
DC current not detected (busy)
32
Dial tone not detected (busy)
33
Busy tone detection (busy)
34
T0 time up (Remote machine not responding)
35
T1 time up (Remote machine not responding)
36
In dialing, polarity reversion detection (Remote machine not responding)
37
Calling is not made (busy)<Collision detected (including CNG detection)>
38
Not used
60
In resend of document filed data, an error occurs in decoding or coding.
61
In resend of document filed data, setting to inhibit resolution conversion is made. (The resolution after resend is set to be
Enlarged.)
62
In resend of document filed data, rotation setting is made for data which cannot be rotated.
63
In resend of document filed data, data cannot be stored in HD after conversion of resolution for resend.
64
In resending data of document file, during conversion for resending, the number of IMS management pages exceeds the
upper limit (999). (IT occurs in OSA Scan to FTP also, resulting in memory over.)
70
E-mail header acquisition error
71
Time out occurs during e-mail receive.
72
Receive reject occurs during e-mail receive.
73
Network communication cannot be made due to port disable.
74
An authentication of the POP server is failed when POP before SMTP is enabled.
75
In the setting of SSL communication, when SSL communication is tried but the server side does not support SSL.
76
There is no image in network communication (transfer).
80
There is no attached file in received e-mail.
81
The attached file of received e-mail is not of TIFF type which is supported.
82
The TIFF type of the attached file in received e-mail cannot be recognized.
ID error
83
The TIFF type of the attached file in received e-mail cannot be recognized.
Endian error
84
The TIFF type of the attached file in received e-mail cannot be recognized.
Version error
85
The TIFF type of the attached file in received e-mail cannot be recognized.
Tag data error
86
The TIFF type of the attached file in received e-mail cannot be recognized.
Tag parameter error
87
The TIFF type of the attached file in received e-mail cannot be recognized.
Header size error
Content of communication interruption
MX-M316N TROUBLESHOOTING 7 – 27
Send/Receive
Send/Receive
Send
Receive
Receive
Receive
Send
Receive
Send
Send/Receive
Receive
Receive
Receive
Receive
Receive
Receive
Receive
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Send
Resend
Resend
Resend
Resend
Resend
OSAScanToFTP
E-mail receive
E-mail receive
E-mail receive
Network send
Network send
Network send
Network send
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive

Advertisement

loading