Advertisement
: '15/Aug.
1
48-5
Purpose
Adjustment
Function (Purpose) Used to correction the scan image magnifi-
cation ratio (in the sub scanning direction).
Section
Scanner section
Operation/Procedure
1)
Select a target adjustment item with scroll key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value is saved.
When the image magnification ratio in the sub scanning direction is
adjusted with SIM48-1, and a different magnification ratio is speci-
fied, and the image magnification ratio is not satisfactory, perform
this adjustment.
When there is an error in the image magnification ratio in reduction,
change the adjustment value in the high speed mode. When there
is an error in the image magnification ratio in enlargement, change
the adjustment value in the low speed mode.
Item/Display
A
MR (HI)
Scanner motor (High speed)
B
MR(MID)
Scanner motor (Reference speed)
C
MR(LO)
Scanner motor (Low speed)
D
SPF(HI)
Document feed (SPF) motor
(High speed)
E
SPF(MID)
Document feed (SPF) motor
(Reference speed)
48-6
Purpose
Adjustment
Function (Purpose) Used to adjust the rotation speed of each
motor.
Section
1
Operation/Procedure
1)
Select an adjustment target mode with [COLOR] [MONO]
[HEAVY] keys on the touch panel.
2)
Select a target adjustment item with scroll key on the touch
panel.
3)
Enter the set value with 10-key.
4)
Press [OK] key.
The set value is saved.
When the adjustment value is increased, the speed is increased,
and vice versa. A change of 1 in the adjustment value corresponds
to a change of about 0.1% in the speed.
Item/
Display
A
POM
Paper exit motor correction value
B
ADUM
ADU motor correction value
C
MM
Main motor correction value
Setting
Content
range
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
Setting
Content
range
1 - 99
1 - 99
1 - 99
MX-M316N SIMULATION 6 – 55
49
49-1
Purpose
Function (Purpose) Used to perform the firmware update.
Section
Operation/Procedure
1)
Save the firmware to the USB memory.
2)
Insert the USB memory into the main unit. (Use USB I/F of the
operation panel section.)
3)
Select a target firmware file for update with the touch panel.
4)
Select a target firmware.
Press [ALL] key to select all the Firmware collectively.
5)
Press [EXECUTE] key.
6)
Press [YES] key.
The selected firmware is updated.
When the operation is normally completed, "COMPLETE" is
displayed. When terminated abnormally, "ERROR" is dis-
played.
Default
value
50
Item/Display
50
ICU (MAIN)
50
ICU (BOOTM)
50
ICU (BOOTCN)
ICU (SUB)
50
LANGUAGE
GRAPHIC
SLIST
PCU (BOOT)
PCU (MAIN)
FIN (BOOT)
FIN (MAIN)
SCU (BOOT)
SCU (MAIN)
FAX (BOOT)
FAX (MAIN)
ANIMATION
WEB HELP
49-3
Purpose
Function (Purpose) Used to update the operation manual in the
Section
Operation/Procedure
Default
1)
Insert the USB memory into the main unit.
value
* When the USB is not inserted, "INSERT A STORANGE E-
50
MANUAL STORED ON" is displayed. When [OK] key is
50
pressed, the display is shifted to the folder select menu 1.
50
2)
Press the folder button of the operation manual data. (The dis-
play is shifted to the operation manual update menu.)
The current version and the update version are displayed.
3)
Press [EXECUTE] key.
[EXECUTE] key is highlighted, and [YES] [NO] keys becomes
active from gray out.
4)
When [YES] key is pressed, the selected operation manual is
updated.
When update is completed normally, "COMPLETE" is dis-
played. When terminated abnormally, "ERROR" is displayed.
Error display in
Content
case of abnormality
ICU Main section
ICUM
ICU Boot section main
ICUBM
ICU Boot section CN
ICUCN
ICU Sub section (ARM9)
ICUS
Language support data
LANG
program
Graphic data for L-LCD
GRAPH
SLIST data for L-LCD
SLIST
PCU Boot section
PCUB
PCU Main section
PCUM
Inner finisher boot section
FINB
Inner finisher main section
FINM
SCU Boot section
SCUB
SCU Main section
SCUM
FAX1 Boot section
FAXB
FAX1 Main section
FAXM
Animation data
ANIME
WEB help
WEBHP
HDD.
Advertisement
