Download Print this page

Sharp MX-M356N Service Manual page 146

Hide thumbs Also See for MX-M356N:

Advertisement

61-3
Purpose
Adjustment/Setup
Function (Purpose) Used to set the laser power
Section
Operation/Procedure
1)
Select a target mode for adjustment with [COPY], [PR600/
FAX], [PR1200] on the touch panel.
2)
Select an adjustment target item with scroll key on the touch
panel.
3)
Enter the adjustment value using the 10-key.
4)
Press [OK] key. (The set value is saved.)
When the laser power and the DUTY adjustment value are
increased, the print density is increased and the line width of
line images are increased.
Mode
Item/Display
COPY
A
LASER POWER (BW)
B
LASER POWER TS (BW)
PR600/FAX
A
LASER POWER (BW)
B
LASER POWER TS (BW)
PR1200
A
LASER POWER (BW)
B
LASER POWER TS (BW)
62
62-1
Purpose
Data clear
Function (Purpose) Used to format the hard disk. (HDD:
Excluding the Operation manual and the
watermark data)
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
Used to execute the HDD format.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-2
Purpose
Operation test/check
Function (Purpose) Used to check read/write of the hard disk
(partial).
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
62-3
Purpose
Operation test/check
Function (Purpose) Used to check read/write of the hard disk
(all areas).
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
Read/write operations are performed.
Content
Laser power setting/BW
Laser power setting toner save/BW
Laser power setting/BW
Laser power setting toner save/BW
Laser power setting/BW
Laser power setting toner save/BW
62-6
Purpose
Function (Purpose) Used to perform the self diagnostics of the
Section
Operation/Procedure
1)
2)
NOTE: E7-03 error occurs. If there may be a trouble in the HDD,
SHORT S.T
EXTENDED S.T
When the operation is completed, [EXECUTE] key returns to the
normal display.
Normal completion -> "OK (RESULT:0)" is displayed.
Abnormal end -> "NG (RESULT: Other than 0)" is displayed.
* If the simulation cannot be executed or terminated abnormally for
some reason, "ERROR" is displayed on the corresponding sec-
tion.
62-7
Purpose
Function (Purpose) Used to print the hard disk self diagnostics
Section
Operation/Procedure
1)
ERROR LOG SECTOR of the SMART function is executed, and
the result is printed.
When the operation is completed, [EXECUTE] key returns to the
normal display.
MX-M316N SIMULATION 6 – 67
Default value
Setting
26/31
range
cpm
machine
0 - 255
160
0 - 255
160
0 - 255
160
0 - 255
160
0 - 255
160
0 - 255
160
Operation test/check
hard disk.
Select the self diag area.
Press [EXECUTE] key.
The self diag operation is performed.
use this simulation to cheek the HDD.
Partial area diag
All area diag
Operation test/check
error log.
Press [EXECUTE] key.
Destination
35cpm
linkage
machine
170
170
170
170
170
170

Advertisement

loading