Advertisement
2. Internal structure
No.
Name
1
Toner cartridge
2
Upper cover of machine (when a second
paper exit unit is installed)
3
Fusing unit
4
Right side cover
5
Right side cover release lever
6
Photoconductive drum
7
Right cover of paper drawer (when a
paper drawer is installed)
8
Paper tray right side cover
9
Bypass tray
1
6
This holds toner for printing. The toner cartridge must be replaced when indicated on the operation panel.
Open this cover to remove jam paper when a paper jam occurs in the output of the job separator or the optional
finisher.
Heat is applied here to fuse the transferred image onto the paper.
Open this cover to remove a misfeed.
To remove a paper misfeed, pull and hold this lever up to open the right side cover.
This drum has a photoconductive coating on its surface.
The images are formed on top of this photoconductive surface.
(The photoconductive coating is green in color.)
Open this to remove a paper misfeed in tray 3 or tray 4.
Open this to remove a paper misfeed in tray 2.
Use this tray to feed paper manually.
When loading a large sheet of paper, be sure to pull out the bypass tray extension.
MX-M316N EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 2
2
3
4
5
7
8
9
Function/Operation
Advertisement
