Advertisement
8. Paper exit section
A. Mechanism relation diagram
Signal name
Name
FUFM
Paper exit cooling fan
OSM
Offset motor
POD1
Paper exit detector 1
POM
Paper exit motor
SHPOS
Shifter home positions sensor
No.
Name
1
Paper exit roller (drive)
2
Paper exit roller (idle)
3
Fusing rear roller (drive)
4
Fusing rear roller (idle)
5
Discharge Brush2
B. Paper exit operation
The paper transported from the fusing section is sent from transport
roller to paper exit roller, and then discharged to the inner tray.
When the paper is discharged to the right tray: The paper is trans-
ported to paper exit roller, and the paper exit motor is reversed. Then
the paper is passed over the right paper exit gate through paper exit
roller to the right tray.
5
1
POD1
2
Cools the fusing section and the paper exit section.
Offsets (shifts) paper.
Detects paper transport from the fusing section.
Drives the roller in the paper exit section.
Detects the shifter home position.
To exit paper onto the exit tray and perform switch back operations when in duplex mode.
To apply pressure to a paper with the paper exit roller (Drive), to give a feeding force of the exit roller to
a paper.
Transport the paper from the fusing unit to the paper exit unit.
To apply pressure to a paper with the paper exit roller (Drive), to give a feeding force of the exit roller to
a paper.
To discharge static generated in the paper exit section.
MX-M316N OPERATIONAL DESCRIPTIONS 11 – 16
OSM
SHPOS
FUFM
3
4
Function and operation
Function and operation
POM
POGS
Advertisement
