Advertisement
Main
Sub
56
1
Used to transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.)
2
Used to backup the data in the EEPROM. SD Card, and HDD (including user authentication data and
address data) to the USB memory. (Corresponding to the device cloning and the storage backup.)
3
Used to backup the document filing data to the USB memory.
4
Used to backup the JOB log data to the USB memory.
5
Used to import the SIM22-6 data to a USB memory in the TEXT format.
6
Used to output the JAM/trouble data.
7
Used to backup the SYS log data to the USB memory.
11
Used to save the data in the SD card to the HDD temporarily.
12
Used to copy the SD card data saved temporarily in the HDD with SIM56-11 to the machine.
60
1
Used to check the memory operations (read/write) of the MFP PWB.
61
1
Used to check the LSU polygon motor rotation and laser detection.
3
Used to set the laser power
62
1
Used to format the hard disk. (HDD: Excluding the Operation manual and the watermark data)
2
Used to check read/write of the hard disk (partial).
3
Used to check read/write of the hard disk (all areas).
6
Used to perform the self diagnostics of the hard disk.
7
Used to print the hard disk self diagnostics error log.
8
Used to format the hard disk. (HDD: Excluding the Operation Manual, the watermark data, and the system
area)
10
Used to clear the job completion list data.
11
Used to delete the document filing data.
12
Used to set Enable/Disable of auto format in a hard disk trouble.
13
Used to format the hard disk. (Operation Manual, watermark data only)
14
Used to initialize (remake) only the database file of the HDD.
63
1
Used to display the shading correction result.
2
Used to perform shading.
3
Used to perform scanner (CCD) color balance and gamma auto adjustment.
4
Used to display the SIT chart patch density.
5
Used to perform the scanner (CCD) color balance and gamma default setting.
64
2
Test print. (Self print) (Monochrome mode)
4
Printer test print. (Self print)
5
Printer test print. (Self print) (PCL)
6
Printer test print. (Self print) (PS)
65
1
Used to adjust the touch panel (LCD display section) detection coordinates.
2
Used to display the touch panel (LCD display section) detection coordinates.
5
Used to check the operation panel key input.
Functions
MX-M316N SIMULATION 6 – 6
Section
LSU
HDD
Scanner
Scanner
Operation panel section
Advertisement
