Advertisement
SD card backup
Option HDD uninstalled
Partition
number
L-101
ICU firmware data
S-101
ICU firmware fixed data
(Pre-install)
S-102
ICU firmware fixed data
(Mirror)
S-105
System data
S-103
User data
I-101
FAX reception data
I-102
FAX reception data
1)
Use SIM56-02 to backup the SD card data to the USB memory.
2)
When the address book has been registered, use the storage
backup function to backup the address book data.
3)
When the operation panel home screen has been customized,
backup the SD card data by using the device cloning function.
4)
When there are some FAX/Internet Fax data received, use
SIM66-62 to backup the image data to the USB memory in the
PDF file type, and give the PDF file to the user. (The data cannot
be restored to the machine.)
5)
Replace the SD card with a new one.
6)
Upgrade the firmware to the latest version.
7)
Use SIM66-10 to clear the image send memory.
8)
Use SIM56-02 to restore the data backed up in procedure 1).
9)
Restore the address book data backed up in the procedure 2). By
using the storage backup function.
10) Restore the data backed up in procedure 3) by using the device
cloning function.
Stored data
ICU firmware (Boot/Main)
lang.sfu
graph.sfu
Boot animation
Boot (CN)
ARM9 firmware
font
web help
spdl
Option FontROM
Same as above
Setting value data file (System
setting/SIM setting data (Image
quality adjustment)/FAX Soft SW)
System setting data
Key operator custom setting data
(Data changed from the default)
FAX reception data (For power
shut off and paper empty)
FEP learning data (Japanese/
Chinese)
Firmware update data (differential
between new and old) (For FSS)
Account management information/
User authentication data
Home screen customize data
Address Data
FAX/Internet Fax reception image
data
FAX/Internet Fax reception image
data (Backup)
MX-M316N OTHERS 13 – 8
Enable/Disable of
Backup means
data backup
Disable
Disable
Disable
Disable
Disable
Disable
Disable
SIM56-2
Enable
sim56-02
Enable
System setting -
data backup -
device cloning
Disable
Disable
Disable
Enable
sim56-02
Enable
System setting -
data backup -
device cloning
Enable
System setting -
data backup -
storage backup
Enable
SIM66-62
Enable
SIM66-62
CAUTION: When replacing the SD card, be sure to use only the speci-
fied SD card supplied as a service part.
The firmware required for booting must be included in
the SD card used in this machine. The commercially
available SD cards have no such data.
NOTE: When U2-40 error occurs, if the error cannot be canceled by
SIM16, or when E7-07 error occurs, there may be some trou-
ble in the SD card.
CAUTION: The data backed up with SIM56-2 must not be installed to
another machine. If installed, the adjustment data will be
overwritten and a trouble may be generated.
Enable/Disable
Data reinstall
of data reinstall
procedures
Enable
SIM49-1
(BOOT cannot be
installed again.)
Enable
SIM49-1
Enable
SIM49-1
Enable
SIM49-1
Enable
SIM49-1
Enable
SIM49-1
Enable
SIM56-2
Enable
SIM56-2
Enable
System setting -
data backup -
device cloning
Disable
Disable
Disable
Enable
SIM56-2
Enable
System setting -
data backup -
device cloning
Enable
System setting -
data backup -
storage backup
Disable
Disable
Advertisement
