Advertisement
: '15/Aug.
1
Item/Display
1
V
TC TAB W
W
TC TAB N1
X
TC TAB N2
Y
TC POSTCARD N2
Z
TC ADSORPTION W
AA
TC ADSORPTION N1
AB
TC ADSORPTION N2
AC
TC INTERVAL BIAS W
AD
TC INTERVAL BIAS N1
AE
TC INTERVAL BIAS N2
AF
TC FRONTEDGE
AG
TC BACKEND SPX
AH
TC BACKEND DPX
3)
Enter the adjustment value (specified value), and press [OK] key.
When [EXECUTE] key is pressed, the electric current entered in the procedure 3) is outputted for 30sec and the set value is saved.
When [EXECUTE] key is pressed again, the output is stopped.
By setting the default value (specified value), the specified output is provided.
ADJ 3
Image lead edge position,
image loss, void area, image
off-center, image magnification
ratio adjustment
(Automatic adjustment)
The following adjustment items can be executed automatically with
SIM50-28.
* ADJ 12
Print image position, image magnification ratio, void area, off-
center adjustment (Print engine) (Manual adjustment)
* ADJ 13
Scan image magnification ratio adjustment (Manual adjustment)
* ADJ 14
Scan image off-center adjustment (Manual adjustment)
* ADJ 15
Copy image position, image loss adjustment
(Manual adjustment)
Menu in SIM50-28 mode
Display/Item
OC ADJ
Image loss off-center sub scanning direction image
magnification ratio adjustment (Document table mode)
SPF ADJ
Image loss off-center sub scanning direction image
magnification ratio adjustment (RSPF mode)
SETUP/
Print lead edge adjustment, image off-center (each paper
PRINT ADJ
feed tray, duplex mode) adjustment
RESULT
Adjustment result display
DATA
Display of data used when an adjustment is executed
Primary transfer bias reference value
Content
MX-M316N ADJUSTMENTS AND SETTINGS 5 – 6
Content
Tab paper
Post card
3-A
Print image off-center automatic
adjustment (Print engine)
(Each paper feed tray)
1)
Enter the SIM50-28 mode.
2)
Select [SETUP/PRINT ADJ] with the key.
3)
Select [ALL] with the key.
CAUTION: By pressing [LEAD] or [OFFSET] key, the following
items can be executed individually.
* [LEAD]: Print image lead edge image position adjustment
* [OFFSET]: Print image off-center adjustment
When [ALL] is selected, both of the above two items are
executed simultaneously.
Default value
Setting
range
26
31
35
5 - 35
14
14
16
5 - 35
18
18
20
5 - 35
22
22
24
5 - 35
26
26
24
0 - 100
50
50
50
0 - 100
50
50
50
0 - 100
50
50
50
0 - 100
50
50
50
0 - 100
50
50
50
0 - 100
50
50
50
0 - 100
60
60
60
0 - 100
90
90
90
0 - 100
80
80
80
Advertisement
