Advertisement
C. Procedures necessary for SD card replacement
(1) SD card data and backup
Some SD card storage data can be backed up, and some data cannot. Some SD card storage data can be reinstalled, and some data cannot.
If the SD card operates normally before replacement and data can be backed up, back up the data before replacement of the SD card referring to the
storage data list. Then reinstall the data after replacement of the SD card.
The SD card includes the following data.
SD card backup
Option HDD installed
Partition
number
L-101
ICU firmware data
S-101
ICU firmware fixed data
(Pre-install)
S-102
ICU firmware fixed data
(Mirror)
S-105
System data
S-103
User data
I-101
FAX reception data
1)
Use SIM56-02 to backup the SD card data to the USB memory.
2)
When the operation panel home screen has been customized,
backup the SD card data by using the device cloning function.
3)
When there are some FAX/Internet Fax data received, use
SIM66-62 to backup the image data to the USB memory in the
PDF file type, and give the PDF file to the user. (The data cannot
be restored to the machine.)
4)
Replace the SD card with a new one.
5)
Upgrade the firmware to the latest version.
6)
Use SIM66-10 to clear the image send memory. (This is in order
to obtain consistency between the HDD data and the image
related memory.)
7)
Use SIM56-02 to restore the data backed up in procedure 1).
Stored data
ICU firmware (Boot/Main)
lang.sfu
graph.sfu
Boot animation
Boot (CN)
ARM9 firmware
font
web help
spdl
Option FontROM
Same as above
Setting value data file (System
setting/SIM setting data (Image
quality adjustment)/FAX Soft SW)
System setting data
Key operator custom setting data
(Data changed from the default)
FEP learning data (Japanese/
Chinese)
Firmware update data (differential
between new and old) (For FSS)
Account management information/
User authentication data
Home screen customize data
FAX/Internet Fax reception image
data
MX-M316N OTHERS 13 – 7
Enable/Disable
Backup means
of data backup
Disable
Disable
Disable
Disable
Disable
Disable
Disable
SIM56-2
Enable
sim56-02
Enable
System setting -
data backup -
device cloning
Disable
Disable
Enable
sim56-02
Enable
System setting -
data backup -
device cloning
Enable
SIM66-62
8)
Restore the data backed up in procedure 2) by using the device
cloning function.
CAUTION: When replacing the SD card, be sure to use only the speci-
fied SD card supplied as a service part.
The firmware required for booting must be included in
the SD card used in this machine. The commercially
available SD cards have no such data.
NOTE: MEMO: When U2-40 error occurs, if the error cannot be can-
celed by SIM16, or when E7-07 error occurs, there may be
some trouble in the SD card.
CAUTION: The data backed up with SIM56-2 must not be installed to
another machine. If installed, the adjustment data will be
overwritten and a trouble may be generated.
Enable/Disable
Data reinstall
of data reinstall
procedures
Enable
SIM49-1
(BOOT cannot be
installed again.)
Enable
SIM49-1
Enable
SIM49-1
Enable
SIM49-1
Enble
SIM49-1
Enable
SIM49-1
Enable
SIM56-2
Enable
SIM56-2
Enable
System setting -
data backup -
device cloning
Disable
Disable
Enable
SIM56-2
Enable
System setting -
data backup -
device cloning
Disable
Advertisement
