Install Slingshot Field Hub - Raven SC1 Accessory Installation Manual

FIGURE 8. Protective Cap

INSTALL SLINGSHOT FIELD HUB

The following items outline some best practices or suggestions for mounting the Slingshot Field Hub:
NOTE: For detailed installation instructions, review the manual provided with the Field Hub.
•
The GPRS/UMTS antennas are equipped with a magnetic base and must be placed on top of the
cabin.
•
The antennas should be mounted in a clear, unobstructed area to ensure clear reception.
•
To avoid confusion, label the antenna cables inside the cabin with "Cellular" and "Diversity." Label
the GPS patch antenna cable with "GPS" as shown in Figure 9 on page 13.
•
Mount a gray SMA grip on both antenna cable connections and mount a blue SMA grip on the GPS
patch antenna cable, as shown in Figure 9 on page 13.
FIGURE 9. Labeled Antenna Cables with SMA Grips
Connect the power cable to the connector with the label "Slingshot PWR." Then connect the RTK IN connector
with the GPS OUT connector. Next, connect the Serial RTK IN with the Slingshot.
Installation: Install Slingshot Field Hub
INSTALLATION
13