Table of Contents
Advertisement
Mount the OmniRow Hydraulic Motors
Hydraulic Motor Mounted to the Planter Row Unit
FIGURE 6.
Parallel Linkage Bars on Inside of Row Unit
Mounting Bracket (Spacer Required)
Row Unit
Mounting
Bracket
Parallel
Linkage
Bars
Important:
Ensure the motor does not come in contact with the parallel linkage bars or row cleaner/
coulter attachments when the row unit travels up and down. If the parallel linkage bars are
located on the inside of the planter row unit mounting bracket, two 0.375" ID x 0.75" OD x 0.5"
L round spacers (P/N 104-1000-256) must be installed between the motor and the planter row
unit to provide clearance when the row unit is in motion. Refer to Figure 5 above.
Manual No. 016-3001-004
Parallel Linkage Bars on Outside of Row Unit
Mounting Bracket (No Spacer Required)
Motor Installed (Spacer Installed)
Hydraulics
9
Advertisement
Table of Contents
