Mount the SmarTrax Valve
SmarTrax Valve Mounting Location
FIGURE 2.
Identify the valve mounting location under the hood, just in front of the steering orbital.
1.
Secure the SmarTrax valve (P/N 063-0131-129) to the hydraulic valve mounting bracket (P/N 107-0171-
2.
907) using four 5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and four 5/16"-18 lock washers (P/N 313-
1000-019).
SmarTrax Valve Mounted to the Machine
FIGURE 3.
Mount the valve mounting bracket to the air cleaner/hood support bracket using two 3/8"-16 x 1" hex bolts
3.
(P/N 311-0054-105), two 3/8" flat washers (P/N 313-2300-013), two 3/8" lock washers (P/N 313-1000-022)
and two 3/8"-16 nuts (P/N 312-1001-037).
Note:
It may be necessary to drill additional holes to install the mounting bracket.
Manual No. 016-4001-127 Rev. B
Steering
Orbital
Air Cleaner/
Hood
Support
Bracket
Hydraulic System Installation
11