Mount Foot Switch; Assemble And Mount The Master Engage Switch - Raven TC1 Installation Manual

C 4
HAPTER

MOUNT FOOT SWITCH

1. Route the Engage Foot Switch (P/N 063-0172-470) to the mating connector on the Breakout Cable (P/N 115-
4010-028).
FIGURE 14. Resume Foot Switch Connection
2. Select a suitable location for the foot switch (P/N 063-0172-470) to be mounted.
NOTE: The foot switch should be installed in a location where the operator has easy access to it and is able
to fully press the pedal.
3. Using the holes in the foot switch as a template, drill holes in the floor of the cab.
4. Secure the foot switch to the floor by installing the supplied screws in each of the mounting holes.
34 TC1/HDU Installation Manual for Kubota M5 Series (Non-Steer Ready)