Install Fittings on the Flow Switch
Fittings Installed on the Flow Switch
FIGURE 2.
Install a -6 ORFS (M) to -6 SAE O-ring (M) straight adapter fitting (P/N 333-0012-084) in Ports A2 and B2 of
1.
the flow switch (P/N 334-003-085).
Install the pressure transducers in Ports A1 and B1 of the flow switch.
2.
Note:
Depending on the model of the machine, the transducer may need to be installed in Port A3
instead of Port A1 to avoid interference.
Mount the SmarTrax Valve
Mounting Plate Installed
FIGURE 3.
Remove the bolts used to secure the machine's radar bracket (beneath the cab).
1.
Manual No. 016-5032-081 Rev. A
Hydraulic System Installation
11