ADLINK Technology AMSTX-CF Series User Manual page 67

Feature
Serial ATA Port 3
Serial ATA Port 4
9.4.8 Chipset > PCH-IO Configuration > USB Configuration
Feature
USB Configuration
USB Overcurrent
USB Overcurrent Lock
USB Port Disable Override
U3_USB1_TX_P (EXTERNAL USB)
U3_USB2_TX_P (EXTERNAL USB)
U3_USB3_TX_P (EXTERNAL USB)
U3_USB4_TX_P (EXTERNAL USB)
U3_USB5_TX_P (PIN HEADER USB)
U3_USB6_TX_P (PIN HEADER USB)
U2_USB1_P (EXTRENAL USB)
U2_USB2_P (EXTRENAL USB)
U2_USB3_P (EXTRENAL USB)
U2_USB4_P (EXTRENAL USB)
U2_USB5_P (PIN HEADER USB)
U2_USB6_P (PIN HEADER USB)
U2_USB7_P (M.2 Key_B)
U2_USB8_P (M.2 Key_E)
BIOS Setup
Options Description
Info only SATA device info
Info only SATA device info
Options Description
Info only
Select 'Disabled' for pin-based debug. If pin-based
Disabled
debug is enabled but USB overcurrent is not
Enabled
disabled, USB DbC does not work.
Disabled Select 'Enabled' if Overcurrent functionality is used.
Enabling this will make xHCI controller consume the
Enabled
Overcurrent mapping data
Selectively Enable/Disable the corresponding USB
Disable Link
port from reporting a Device Connection to the
Select Per-Pin
controller.
Disabled Enable/Disable this USB Physical Connector
(physical port). Once disabled, any USB devices
Enabled
plug into the connector will not be detected by BIOS
Disabled or OS.
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
AMSTX-CF Series
59