ADLINK Technology AMSTX-CF Series User Manual page 53

Feature
Restore AC Power Loss
Power Supply Unit
PCI Express Wake
Power Consumption ►
9.3.4 Advanced > Power Consumption > Power Consumption
Feature
Power Consumption
Current Input Current
Current Input Power
VIN
VCORE
RTC
9.3.5 Advanced > System Management
Feature
System Management
Version
SEMA Firmware
Build Date
SEMA Bootloader
Build Date
SEMA Features ►
Flags ►
SPI ROM WP ►
BIOS Post Update Menu
BIOS Setup
Options
Power On
Power Off
Last State
Emulate AT Mode
ATX Mode
Disabled
Enabled
Sub-Menu
Options
Info only
Info only
Info only
Info only
Info only
Info only
Options
Info only
Info only
Info only
Info only
Info only
Info only
Sub-Menu
Sub-Menu
Sub-Menu
Sub-Menu
Description
Select AC power state when power is re-applied after
a power failure.
ATX: OS will turn off system power when shutdown.
NOTE: AT mode will not support S3 & S4, so it will
change Power Loss State to Power On
Disable/Enable PCI Express Wake ping for PCIe
device wake function
Power Consumption
Description
Current Input Current
Current Input Power
VIN
VCORE
RTC
Description
Version of SEMA Firmware
Build Date of SEMA Firmware
Version of SEMA Bootloader
Build Date of SEMA Bootloader
SEMA Features
Flags
SPI ROM write protect
An update BIOS interface
AMSTX-CF Series
45