Remove The Light Engine Louver; Remove The Front Lens Bezel - Christie J Series Service Manual

4.11.3 Remove the Light Engine Louver

(8 minutes)
1. Remove the top cover. See
2. Remove (2) #2 Phillips® counter sunk screws, which secure the light engine louver.
3. Remove (2) 3 mm hex screws that secure the light engine louver to the base plate.
4. Lift out the light engine louver.

4.11.4 Remove the Front Lens Bezel

(13 minutes)
1. Remove the top cover. See
2. Remove (6) #1 Phillips® screws that secure the dust shield to the lens mount.
3. Remove (2) 3 mm hex screws that secure the front lens bezel to the bottom chassis.
4. Remove the lens bezel from the projector.
5. Remove (6) #1 Phillips® screws that secure the dust shield to the front lens bezel.
6. Remove the dust shield from the front lens bezel.
J Series 1000W and 1200W Service Manual
020-100725-04 Rev. 1 (07-2015)
Remove the Top Cover.
Remove the Top Cover.
Section 4: Parts and Module Replacement
4-31