Power Requirements; Lamp Specification - Christie J Series Service Manual

Section 6: Specifications
6.6

Power Requirements

Parameter
Rated Voltage
Rated Current
Line Frequency
AC Input Coupler
Line Cord
(applies to NA cord only)
Inrush Current
Maximum Power Consumption

6.6.1 Lamp Specification

Type
Power
Rated lamp life to 50% brightness
(2 hours on, 15 min. off duty cycle)
Warm-up time (to full output)
Operating position
NOTE: Full 1000W lamp power is available only if AC input is greater than 130 VAC
6-10
Lamp Power
1200W 200 VAC to 240 VAC
1000W 100 VAC to 240 VAC
1200W 10 A max.
1000W 12 A max.
All 50/60 Hz
All 15 A, 250 VAC, IEC 320-C14
1200W 16 AWG type SJT with plug, NEMA 6-15P, 13 A
1000W 14 AWG type SJT with plug, NEMA 5-15P, 15 A
All 60 A max
1200W 2000W
1000W 1200W
Cermax® Xenon lamp system
1200W 800W min, 1200W max (software adjustable)
1000W 700W min, 1000W max (software adjustable)
1200W 1000 hours. min
1000W 1500 hours. min
10 minutes max
Full rotation allowed about the lamp axis.
±15 degrees max tilt of lamp axis from horizontal.
Requirement
J Series 1000W and 1200W Service Manual
020-100725-04 Rev. 1 (07-2015)