Image Processor Performance; Input (Source Signal) Compatibility; Analog (Only) Input - Christie J Series Service Manual

Section 6: Specifications
6.3

Image Processor Performance

Min input pixel rate
Max input pixel rate
Max input resolution
Min input resolution
Max input frame rate with
Dual Image Processor Card
Max input frame rate with
Standard Image Processor
Card
Processing
Source switching time
6.4

Input (Source Signal) Compatibility

6.4.1 Analog (Only) Input

Connectors
Color spaces/signal types
A/D conversion
Sampling clock range
6-6
13 Megapixels/s
165 Megapixels/s (Standard mode)
330 Megapixels/s (High bandwidth mode)
2048 × 1536 (QXGA)
640 × 400
120 Hz at 2048 × 1080
92 Hz at 2048 × 1536*
50 Hz at 2048 × 1536 (QXGA)*
10 bit throughout *
Switch time 1 second
Switch time 3 seconds
5 female BNC, 75 Ohm
R/Pr
G/Y
B/Pb
H/C
V
RGB
YPbPr
10 bits
13 MHz to 165 MHz (Standard Image Processor)
13 MHz to 330 MHz (Dual Image Processor)
Standard Image Processor
Dual Image Processor
Dual Image Processor Card required
* QXGA with sources that can output
minimum blanking
*With sources that can output
minimum blanking, otherwise lower
vertical rates
* Except Dual-DVI input in dual-link
mode (dual 8 bit input paths into 10
bit processing)
Low bandwidth signals
3D signals
J Series 1000W and 1200W Service Manual
020-100725-04 Rev. 1 (07-2015)