Regression Report - Micromeritics GEMINI VII Operator's Manual

R R
EGRESSION EPORT
Reports > Regression Report
Use to generate a Statistical Process Control (SPC) Regression report to determine the
interdependency between two variables. Up to three dependent variables (y-axis) may be plotted
against a single independent variable (x-axis). The degree of correlation between the variables is
also reported.
Gas Adsorption Regression Report
Field or Button
Autoscale [check box]
Axis Range [text box]
Label data [check box]
Recalculate archived
SPC results [check box]
Report [button]
Samples [button]
Save as Default [button] Click to save selected report options as default report settings.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
When enabled, allows the x- and y-axes to be scaled automatically.
Enter the beginning and ending values for the x- and y-axis ranges.
These fields are disabled if Autoscale is selected.
Use to label the points on the plot to correspond with the values in
the sample files.
The first time this option is used, the time it takes to generate the
report is lengthened. The second time the report is generated, if
using the same sample files used in the initial calculation, it is
recommended that this option not be selected since the data was
recalculated previously. If a sample file is added or removed from the
report after the initial recalculation, this option should be selected
again to ensure the data from the newly added or removed sample
file is recalculated.
Generates the report.
Select additional sample files to add to the report.

Regression Report

6 - 3