Unit Configuration - Micromeritics GEMINI VII Operator's Manual

U C
NIT ONFIGURATION
Unit [n] > Unit Configuration
Use to display and confirm hardware / software configurations and calibrations of the analyzer.

Unit Configuration

Field or Button
Volume Correction
[text box]
Change IP [button]
Delete Data From
Instrument [button]
For fields and buttons not listed in this table, see
tons on page 2 -
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
Displays the volume correction of the analyzer. If a different value is
entered in this field, it is stored with sample data at the beginning of
the analysis. The value in this field is used in calculating free space.
Click to display the Unit IP Setup window. Use to change the IP
address and subnet mask assigned during installation. Do not edit
these fields unless instructed by a Micromeritics Service Rep-
resentative.
Restores the controller to factory defaults.
2.
Unit Configuration
Common Fields and But-
2 - 15