Micromeritics GEMINI VII Operator's Manual page 27

Common Fields and Buttons (continued)
Field or Button
Exit
Export
File
File name
From / To
Insert
List
Name
Next
OK
Open
Prev
Preview
Print
Remove
Replace
Replace All
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
Exits the application. If a file is open with unsaved changes, a prompt
displays providing the option to save the changes and exit or to exit the
application without saving the changes. If an analyzer is currently
operating, an additional prompt displays to confirm exiting from the
software.
Exports data in a sample file as a .TXT, .XML or .XLS file. When saved
to a file, the data can be imported into other applications.
Selects the destination directory. Enter a new file name in the File
name field, or accept the default. Select to save the file as a report sys-
tem (.REP), a spreadsheet (.XLS), a portable document format (.PDF),
or an ASCII text (.TXT) file format.
Selects a file name from the list shown or enter a file name. If the
required file type is not shown, select the type of file from the list.
When working with report parameters windows, indicates the From and
To range for x- and/or y-axes.
Inserts one row above the selected row in the table.
Creates a list of sample or other type files. The list will contain file
name, date / time the file was created or last edited, file identification,
and file status.
Contains a list of files in the selected directory or library.
Moves to the next window or next step.
Saves and closes the active window.
Opens the selected file. Alternatively, double-click the file name in the
Name column to open the file.
Moves to the previous window.
Previews predefined reports. Click the tabs at the top of the window to
preview each selected report. When an analysis has not been run on a
sample, this button is disabled.
Sends the report to the selected destination (screen, printer, or file).
Removes the selected file or files from the list.
Selects another file where the values will replace the current file's val-
ues.
Selects another .SMP file where the values will replace all values for
the active sample file. The original file will remain unchanged. No ana-
lysis data is added to the file. The only information added is sample
information, material properties, liquid properties, analysis and report-
ing parameters.
Common Fields and Buttons
2 - 3