Manually Enter Data - Micromeritics GEMINI VII Operator's Manual

M E
ANUALLY NTER
In 21CFR11 environments, this feature is applicable to members of the Developer
group only.
This process allows the manual entry of pressure data from a sample file with a Complete status.
There are two methods for manually entering data into a sample file:
Copy and paste onto the graph area of the interactive window.
n
Import data into the interactive window.
n
C P
OPY AND ASTE
To display the file status in a search window, go to File > Open. Right-click the
column header then click More... Scroll to the MIC entries and enable MIC Status.This
is a snippet
1. Open a sample file with a Complete status. The file will open in the interactive reports win-
dow.
2. Right-click in the graph area of the interactive reports window, then select Copy data.
Example of Report window
3. Open another sample file using the Advanced option presentation.
4. On the Sample Description tab, select Manually entered in the Type of Data group box.
5. In the view selector drop-down list at the bottom of the window, click Advanced, then select
Isotherm.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
D
ATA
M E
ANUALLY NTERED

Manually Enter Data

D
ATA
3 - 7