Software Updates - Micromeritics GEMINI VII Operator's Manual

2 About the Software
S U
OFTWARE PDATES
User Account Control in the Windows operating system must be enabled to ensure all
components of the Micromeritics application are installed properly. If UAC is not
enabled, right-click the setup.exe installer file and select Run as administrator.
The most current version of the instrument software can be found on the Micromeritics web page
(www.Micromeritics.com).
When performing a software update, existing data files are not overwritten. There are three types
of subsequent installation:
Later version than the current installation.
n
Same version as the current installation.
n
Earlier version than the current installation.
n
Insert the setup media into the media drive. The setup program starts automatically. If the
program does not start automatically, navigate to the installation media drive, locate and double-
click the setup.exe file.
Existing Confirm application users and groups are not affected by software updates.
Any changes to Confirm users and Confirm groups must be made using Windows
Users and Groups.
2 - 22
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021