Micromeritics GEMINI VII Operator's Manual page 67

Analysis Conditions (continued)
Field or Button
and T [button]
p°
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
Use to select options for obtaining the saturation pressure (
analysis bath temperature.
Entered. Select to manually enter the
Most recent measured. Select to use the most recently measured
saturation pressure.
Measure p for each point (models p and t only). Select if
°
measured for each point.
Bath temperature. Calculates
Analysis Conditions
.
p°
using the entered bath temperature.
p°
) and
p°
is to be
p°
4 - 5