Temkin Report - Micromeritics GEMINI VII Operator's Manual

7 Selected Report Options
T R
EMKIN EPORT
The Temkin isotherm is used to model adsorption data where the heat of adsorption drops linearly
with increasing coverage.

Temkin Report

Field or Button
Pressures [button]
7 - 48
Description
Use to select a pressure range for report calculations and points for
exclusion from calculations.
Calculation pressure range. Enter the minimum and maximum
pressures to be used in the pressure table.To exclude a point from
the calculations used to generate the report, select Exclude.
Exclude All. Select to exclude all pressure points in the table.
Include All. Select to include all pressure points in the table.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021