Common Fields And Buttons - Micromeritics GEMINI VII Operator's Manual

2 About the Software
C F
OMMON IELDS AND
The fields and buttons in the following table are located in multiple windows throughout the
analyzer application and have the same description or function. Fields and button descriptions not
listed in this table are found in tables in their respective sections. All entry fields will accept
information when using a bar code reader.

Common Fields and Buttons

Field or Button
Add
Add Log Entry
Append
Autoscale
Axis Range
Bar Code (default field
label name)
Browse
Cancel
Clear
Close
Close All
Comments
Copies
Delete
Destination
Edit
2 - 2
B
UTTONS
Description
Adds an item to the list.
Use to enter information that will display in the sample log report that
cannot be recorded automatically through the application. Click the but-
ton again to enter multiple log entries.
Use to insert one row at the end of a table.
When enabled on report parameters windows, allows the x- and y-axes
to be scaled automatically. Autoscale means that the x- and y- ranges
will be set so that all the data are shown. If Autoscale is not selected,
the entered range is used.
On report parameters windows, the From / To fields are enabled when
Autoscale options are not selected. Enter the starting and ending val-
ues for the x- and/or y-axes.
Use to enter additional information about the sample, such as a sample
lot number, sample ID, etc.
Searches for a file.
Discards any changes or cancels the current process.
Use to clear the table entries and display only one default value.
Closes the active window.
Closes all active windows. If changes were made and not yet saved, a
prompt displays for each changed file providing the option to save the
file.
Enter comments about the sample or analysis. Comments display in
the report header.
Selects the number of copies to print. This field is only enabled when
Print is selected.
When working with tables deletes the selected information.
Selects the report destination.
When working with report parameters, highlight the item in the Selected
Reports list box and click Edit to modify the report details.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021