Micromeritics GEMINI VII Operator's Manual page 154

7 Selected Report Options
f-Ratio Report (continued)
Field or Button
Reference isotherm
[group box]
Selected Reports
[group box]
For fields and buttons not listed in this table, see
tons on page 2 -
7 - 26
Description
Browse to select a sample file to use as a reference for the isotherm.
Select a file containing an isotherm measured from a non-porous
sample of the same material as the current sample.
Tabular Report. Use to have a tabular report of data generated.
f-Plot. Use to generate a normalized isotherm.
Autoscale x-axis. The x-axis field is dimensionless in units of f-
n
ratio.
Autoscale y-axis. The y-axis field shows the quantity of gas
n
adsorbed.
Overlay samples. Use to overlay sample files on the f-plot.
n
2.
Common Fields and But-
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021