Instrument Status; Show Instrument Log - Micromeritics GEMINI VII Operator's Manual

2 About the Software
I S
NSTRUMENT TATUS
S I
HOW NSTRUMENT
Unit [n] > Show Instrument Log
In 21CFR11 environments, see
Use to display a log of recent analyses, calibrations, errors, or messages.
Instrument Log
Field or Button
Add Log Entry [button]
Analysis/
Calibration/
Message [check box]
For fields and buttons not listed in this table, see
tons on page 2 -
2 - 16
L
OG
System Audit Trail on page 2 -
Description
Use to enter information to appear in the sample log report that can-
not be recorded automatically through the application. Click the but-
ton again to enter multiple log entries.
Select the logs to display.
2.
27.
Common Fields and But-
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021