Summary Report - Micromeritics GEMINI VII Operator's Manual

S R
UMMARY EPORT
The Summary Report for physisorption analyses provides a condensed summary of selected data
results.
In the Pore Volume group box, if Adsorption total or Desorption total is selected, the p/po field is
enabled. Enter the relative pressure used to calculate the total pore volume.

Summary Report

Field or Button
Item [n] [selection]
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
Use to enable the first Pass/Fail item. Until the Summary Report is
selected, S A Single-point BET will be displayed by default. When
selected, click Pass/Fail, then select pass/fail criteria options.
Pass/Fail [n]. Click to display the Pass/Fail Options window for
selection of pass/fail criteria.
S A: Single-point BET. Use to enable Pass/Fail [n] in the Item [n]
group box.
Upper/Lower. Specify upper and lower limits for the selected
parameter. A range can be left open by not selecting the limit. In the
text box to the right of Upper / Lower, enter operator instructions to
be displayed if a failure is encountered.
Summary Report
7 - 43