7 Selected Report Options
DFT P
S
R
ORE
IZE
The DFT Pore Size report contains the results of pore size distribution analyses using a non-local
DFT range of micro and mesopore ranges.
DFT Pore Size Report
Field or Button
Geometry
[drop-down box]
Model [drop-down box]
Pressures [button]
7 - 12
EPORT
Description
Select the pore shape.
Lists the models that meet the specified criteria and match the
adsorbate and temperature of the sample data. If no models appear,
no models meet the selected criteria. One model must be selected.
Use to select a pressure range for report calculations and points for
exclusion from calculations.
Calculation pressure range. Enter the minimum and maximum
pressures to be used in the pressure table.To exclude a point from
the calculations used to generate the report, select Exclude.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Need help?
Do you have a question about the GEMINI VII and is the answer not in the manual?