Micromeritics GEMINI VII Operator's Manual page 139

BJH T R
ABULAR
Highlight BJH Tabular Report in the Selected Reports list box on the BJH Adsorption Report
Options window, then click
BJH Tabular Report
Field or Button
Collected points
[selection]
Columns [button]
Fixed pore size table
[selection]
Table [button]
For fields and buttons not listed in this table, see
tons on page 2 -
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
EPORT
Edit to specify the method of data reduction.
Description
Use to include all relative pressure points collected. Refer to the
Columns button below.
Select the data types to include in the report. Column [n] indicates
the column order and data contents for the report.
Use to specify exact pore sizes for volume or area data. Click
to modify the fixed pore size table. Refer to
tons elsewhere in this table.
The fixed pore size table must contain a minimum of two points. The
points must be strictly decreasing. Enabled only when Fixed pore
size table is selected.
2.
BJH Adsorption/Desorption Report
Table and Columns
Common Fields and But-
Table
but-
7 - 11