Table of Contents
Advertisement
9 C
ALIBRATION
Unit [n] > Calibration
A calibration file was created specifically for the analyzer and included with the
accessories. It is not necessary to recalibrate the system unless it seems out of
calibration.
Disabled calibration menu options can be accessed only with the assistance of an authorized
Micromeritics Service Representative. Calibrations can be saved to a file and reloaded later.
To review calibration details of the analyzer, go to Unit [n] > Unit Configuration.
Generally, it will not be necessary to change the data in the calibration file. However, if a condition
occurs during the operational verification that requires changes to the calibration data, changes
should be saved in a file. Calibration data files are retained in the analyzer history file and can be
reloaded in the event that calibration data becomes corrupt.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
9 Calibration
9 - 1
Advertisement
Table of Contents
Need help?
Do you have a question about the GEMINI VII and is the answer not in the manual?
Questions and answers