Micromeritics GEMINI VII Operator's Manual page 84

5 Perform an Analysis
P S
ERFORM A AMPLE
Unit [n] > Start Analysis
In 21CFR11 environments, users are required to login to the Confirm application to
start an analysis. Once the analysis window is opened, manual control is disabled
until the analysis has completed. During analysis, pausing and resuming is allowed,
however, steps cannot be skipped.
Ensure the analyzer safety shield is closed before beginning an analysis. If the ana-
lyzer is operated at an excessive pressure, the sample or balance tube could become
dislodged from its port, possibly causing personal injury or damage to the equipment.
Sample Analysis
Field or Button
Density / Mass /
Sample + Tube /
Empty Tube [text box]
New [button]
Sample tube
[drop-down box]
Start [button]
For fields and buttons not listed in this table, see
tons on page 2 -
5 - 12
A
NALYSIS
Description
Enter values for the sample's mass and density. These values may
be edited after analysis.
Creates a new sample file.
Select the sample tube to be used for this analysis.
Click to start the analysis.
2.
Common Fields and But-
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021