Sample Files - Micromeritics GEMINI VII Operator's Manual

3 S F
AMPLE ILES
Software in 21CFR11 Environments on page 2 - 24
Sample files include the information required by the analyzer to perform analyses and collect data.
A sample file identifies the sample, guides the analysis, and specifies report options and may be
displayed in Advanced, Basic, or Restricted presentation display mode.
A sample file consists of parameter sets; however, parameter sets can also stand alone. A sample
file may be created either prior to or at the time of analysis.
Parameter files allow for repeated use of parameter sets. For example, if the same analysis
conditions exist for multiple analyses, an Analysis Conditions file containing the recurring
conditions can be created. When the sample file is created, the Analysis Conditions file can be
selected for the analysis conditions. Once it becomes part of the new sample file, the new file can
be edited as needed without affecting the original Analysis Conditions file.
The analysis application contains a default method. A method is a template for sample files that
contains the parameters to be used for an analysis. When a new sample file is created, all the
parameters are filled with the values in the default method.
To change the view for the selected window, use the drop-down list at the bottom of
the sample file editor.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021

3 Sample Files

3 - 1