Perform A Quickstart Analysis - Micromeritics GEMINI VII Operator's Manual

5 Perform an Analysis
P Q
ERFORM A UICK
Unit [n] > QuickStart Analysis
In 21CFR11 environments, users are required to login to the Confirm application to
start an analysis. Once the analysis window is opened, manual control is disabled
until the analysis has completed. During analysis, pausing and resuming is allowed,
however, steps cannot be skipped.
The QuickStart Analysis option automatically creates a sample file and assigns the default
parameters. Click Edit
Ensure the analyzer safety shield is closed before beginning an analysis. If the ana-
lyzer is operated at an excessive pressure, the sample or balance tube could become
dislodged from its port, possibly causing personal injury or damage to the equipment.
QuickStart Analysis Fields and Buttons
Field or Button
Sample tube
[drop-down box]
For fields and buttons not listed in this table, see
tons on page 2 -
5 - 18
S A
TART NALYSIS
to modify the parameters or
Description
Click the drop-down arrow to select a sample tube file. This option is
applicable only if the calculated method for measuring free space is
selected for analysis conditions.
2.
Browse to select another file.
Common Fields and But-
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021