Degas Conditions - Micromeritics GEMINI VII Operator's Manual

D C
EGAS ONDITIONS
File > Open > [.DEG File]
Or, click the Degas Conditions tab when using Advanced option presentation.
Use this option only when the Smart VacPrep is installed. Degassing is a required
step in preparation for an analysis. The Degas Conditions tab provides settings that
will be automatically applied during the degassing procedure when using the Smart
VacPrep.
If using a FlowPrep or a VacPrep use the heating phase section for reference only.
The Degas Conditions tab displays only if enabled in Options > Option
Presentation > Show Degas Conditions.
The Smart VacPrep Operator Manual can be found on the Micromeritics web page
(www.Micromeritics.com).

Degas Conditions

Field or Button
Copy QuickStart
degas conditions
from Smart VacPrep
Unit [drop-down box]
Degas conditions
[drop-down box]
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
Description
Use to copy the degas conditions settings from the selected
Smart VacPrep unit and port.
Use to browse for a .DEG file that contains degas condition para-
meters to be used in the analysis.
Degas Conditions
4 - 7