Diagnostics; Start Diagnostic Test - Micromeritics GEMINI VII Operator's Manual

8 D
IAGNOSTICS
Unit [n] > Diagnostics
Use to display diagnostic readings, start diagnostic tests, and open saved diagnostic reports.
Each test generates a file to the default directory name and path of ...\...\Service\userdiag unless
another directory name was specified. These reports can be sent to a Micromeritics Service
Representative for examination.
S D
TART IAGNOSTIC
Unit [n] > Diagnostics
Provides a method to start a diagnostic test immediately. Upon completion of the diagnostic test,
the file is saved as a .REP file which can be retrieved by going to Reports > Open Report and
selecting the report file.
Use to clean and verify gas lines when connecting or changing a gas. See
Gas Line on page 10 - 8
requested by a Micromeritics Service Representative.
This option is typically used and /or requested by a Service Representative. These tests create
and save files to the ...\...\Service\userdiag directory. The Micromeritics Service Representative
may request an emailed or faxed copy of the file for diagnostic purposes.
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
T
EST
for detailed instructions. Also used to perform diagnostic tests

8 Diagnostics

Clean and Verify the
8 - 1