Table of Contents
Advertisement
Preset Monitor
Status Monitor
Salvo List
Default Name
Set
Checkbox Options
The checkbox options section is just below the panel options section, enclosed in the same
region:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are clear.
The following items are the checkbox options:
• User-Programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• Source Master Default.
Makes a control-level source the controlling device (or master device) by default.
Otherwise, the destination is the master by default. (The option is specifically for use
with NV9000 series machine control routers.)
None
The preset source video is not sent to a monitor.
‹device›
The preset source video for the selected destination appears
on the specified monitor (device).
None
The current source video is not sent to a monitor.
‹device›
The current source video for the selected destination
appears on the specified monitor (device).
[none]
Salvo lists appear in the drop-down menu. A salvo list, as
you might think, is a list of salvos. The salvos in the list you
choose are the salvos the operator can choose in salvo
mode.
Salvo lists are defined, in NV9000-SE Utilities, under the
'Views' pane, using the 'Salvo Lists' table and the 'Salvo List
Details' table.
The NV9000 configuration might not have any salvo lists, in
which case 'None' is the only entry in the drop-down menu.
System Name
A list of "name sets" appears in the drop-down menu. The
name sets can be defined under the System Management
pane of NV9000-SE Utilities. Choose 'System Name' in this
list if you do not want, or do not care about, alternate device
names. Do not choose 'System Name' if you are configuring
any 'Name Set Toggle' buttons.
NV9649
User's Guide
45
Advertisement
Table of Contents
