Checkbox Options - GRASS VALLEY NV9000 User Manual

Configuration

Checkbox Options

Checkbox Options
The checkbox options section is at the bottom of the panel options section:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are clear except 'Use Continuous Scrolling' .
The following items are the checkbox options:
• User-programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• Hold preset default.
Makes "hold" mode active when the panel reverts to its default state (after a 'Default
State' button is pressed, or when the panel is restarted).

• Enable destination lock.
Check 'Enable Destination Lock' so that any 'Destination Lock' button on the panel will
function.
• Enable destination protect.
Check 'Enable Destination Protect' so that any 'Destination Protect' button on the
panel will function.
• Source master default.
Makes a machine-control-level source the controlling device (or master device) by
default. Otherwise, the destination is the master device by default. (The option is
specifically for use with NVISION series machine control routers.)
"Source is master" is used for duplication, or broadcast routing, on a machine control
level. "Destination is master" is for machine-to-machine editing. Regardless of the
default, you can place a 'Source is Master' button on the panel.

• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular
panel to be effectively hidden. When another panel changes the source to one not
configured for this panel, this panel displays asterisks instead.
20
Note: a 'Hold' button is needed only when you want the operator to be able to
view or change the mode.
Note: a 'Source is Master' button is a toggle that reverses the direction of data
routing for devices used in data level (machine control) takes.