Table of Contents
Advertisement
2 Turn the knob until the desired device category mnemonic appears in the 'Preset'
display. Then press the knob to select that category.
3 When the category has been selected, you can now either turn the knob to select a
device within the category, or press suffix buttons to "build" a device name from the
category mnemonic and the suffixes you press. You can actually use both techniques to
select a device in the category.
(You can press a 'Clear' button if you make a mistake. 'Clear' removes the most recently
entered suffix.)
Procedure I — Perform Device Selection using Category Pages
An NV9649 panel in server mode can be configured to allow operators to perform device
selection using category pages. When the NV9649 is so configured, it shows 'CatPages' in
the 'Info' display. This method also involves use the panel's knob.
To perform device selection by category page:
1 Place the panel in either source mode or destination mode, as required.
If any category buttons are already showing on the panel, you can use those category
buttons to select a category (and then skip to step 4 below).
2 Turn the knob until the desired category page appears. Then press one of those
buttons to select that category.
The different category page names show in the 'Info' display as you turn the knob.
3 When you have selected a category, the first of the suffix pages (if any have been
defined) appears. If no suffix pages have been defined, the panel's buttons will be blank
and you must use step 4b below.
4 You now have a choice: (a) use the suffix pages, appending suffixes to the category
mmemonic, or (b) use the knob to scroll through device names.
a Use the suffix pages.
b Use the knob to scroll through devices.
(You can press a 'Clear' button if you make a mistake. 'Clear' removes the most recently
entered suffix.)
Salvo Mode
The panel must be configured to have a salvo list. Otherwise, salvo mode does not function.
The salvo button places the panel in salvo mode where the operator can scroll through the
panel's salvo list. When you find the salvo of you choice, press the 'Take' button to execute
the salvo. After the salvo executes, the panel returns to its normal mode.
You will form a device name by appending suffixes to the category mnemonic. You
may press any suffix button in any suffix page. Use the panel's knob to scroll
through suffix pages.
When you stop entering suffixes, the device is considered selected.
To use this method of device selection, you must press the knob. Whenyou do so,
the panel enters a mode in which you can turn the knob to scroll through the list of
devices that belong to the category selected in step 2.
When you stop turning the knob, the device is considered selected.
NV9649
User's Guide
115
Advertisement
Table of Contents
