GRASS VALLEY NV9649 User Manual page 50

Configuration
Configuration Page for the LCD XY/MD Model
Checkbox Options
The checkbox options section is just below the panel options section, enclosed in the same
region:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are unchecked except 'Src/Dst Immediate Take' . That
particular option is enabled by default.
The following items are the checkbox options:
• User-Programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• Save Preset Default.
Makes 'Save Preset' mode active when the panel reverts to its default state (after a
Default State button is pressed, or when the panel is restarted).

• Hold Preset Default.
Makes "hold" mode active when the panel reverts to its default state (after a Default
State button is pressed, or when the panel is restarted).

• Enable Destination Lock.
Check 'Enable Destination Lock' so that any 'Destination Lock' button on the panel will
function.
• Enable Destination Protect.
Check 'Enable Destination Protect' so that any 'Destination Protect' button on the
panel will function.
• Source Master Default.
Makes a machine control source the controlling device (or master device) by default.
Otherwise, the destination is the master by default. (The option is specifically for use
with NV9000 series machine control routers.)
40
A 'Save Preset' button is needed only when you want the operator to be able to
view or change the mode.
Note: a 'Hold' button is needed only when you want the operator to be able to
view or change the mode.