Reboot; Menus Under The Nv9609 Model - GRASS VALLEY NV9649 User Manual

Operation

Menus under the NV9609 Model

To go back to the 'Manage Configs' menu, press 'Exit Recall' at the right.
To clear a named setup, simply press the button for that named setup.
Be cautious: doing so removes data that cannot easily be recovered. The menu presents a
warning to which you must respond before you can proceed:
PUSH IF
YOU ARE
SURE!
Press the red button (that read "Push if you are sure") to continue with the clear.
 Whenever you recall, save, or clear any named setup, that setup becomes the current
setup. Subsequent source and destination assignments are recorded in the current
setup and other setups are not affected.

Reboot

The 'Reboot' button of the menu lets you restart the NV9649 and all the NV9649 clients
associated with it.
If you press the reboot button, the menu presents a cautionary sub-menu:
PANEL ID
6491
Press 'Reboot' (the red button) if you want to proceed. A reboot takes several seconds.
Press 'Cancel' if you do not want to reboot.
Menus under the NV9609 Model
Under the NV9609 behavioral model, the menu functions as if it were an NV9609 menu as
much as is possible. (Under this model, the menu presents information in the 4 displays in
the middle of the panel.
By pressing the menu button repeatedly, you can cycle through 8 sub-menus:
• Software Versions
• User ID
• Software version
• Application Version
120
CANCEL
CLEAR
EXIT
CLEAR
CANCEL RE–BOOT
• Panel name
• User name
• Boot version
• Low button illumination level