Table of Contents
Advertisement
Operation
Button Functions
If neither of the control ports for the source or destination are in use, the take occurs
naturally without any further action required. Note that the ports will become "in use" after
the take you are performing.
This data routing option applies in both operating modes.
Semi-Automatic Data Routing
This data routing option applies only in X-Y mode.
If a control port for the source or destination is "in use, " a take involving a machine control
level occurs on all levels except the machine control level. Nevertheless, you are given the
opportunity to complete the take on the machine control level by pressing the 'Take'
button a second time.
If neither of the control ports for the source or destination are in use, the take occurs
naturally without any further action required. Note that the ports will become "in use" after
the take you are performing.
Follow these steps to take the data level as a breakaway:
1 Select a destination.
2 Select a source.
3 Examine the display and the take button.
4 If the display shows "Control in Use" and the Take button is still high-tally, press the
'Take' button again to complete the take.
You can cancel the control-level take by pressing a button other than 'Take' .
Button Functions
The NV9649 has 3 behavioral models. The sets of button functions differ in the 3 models.
Buttons for the Server Model
There are 17 button function types for a panel in server mode (not counting 'Undefined'):
Assign
Clear
Destination Protect
Source
Take All
Assign
When the panel is in destination mode, the button begins the assignment of a selected
destination to an NV9649 control unit.
When the panel is in source mode, the button begins the assignment of a selected source
to a source button of an NV9649 control unit.
See
Operating
92
Broadcast
Destination
Menu
Source Mode
Methods, on page 112 for detail.
Category
Chop
Destination Lock
Destination Mode
Quick Source
Salvo
Src/Dst Mode
Take
Advertisement
Table of Contents
