GRASS VALLEY NV9649 User Manual page 37

• Use continuous scrolling.
If you check this box, the panel will scroll source or destination devices continuously (or
indefinitely). That is, the display will show the first device in the list following the last
when you are scrolling up, and will show the last device after the first if you are scrolling
down.
If you leave this box unchecked, the panel will stop scrolling when it reaches either the
beginning or end of the list.
This option does not affect scrolling of salvos when the panel is in salvo mode.
• Server panel destination remove.
This option, when checked, prevents the NV9649 from being able to perform takes.
Under this option, 'Take' buttons do not illuminate when a source is preset.
The NV9649's destination display and status display remain blank.
The underlying consideration is that takes are to be performed on the NV9648 clients
only.
• Disable destination assignments.
If you check this option, the NV9649's ability to assign destinations to NV9648 sections
is disabled.
• Quick preset take.
If you check this option, when the operator presets a source, all 'Take' buttons in all
NV9648 control units go high-tally. The operator may then use the 'Take' button in the
control unit that corresponds to the destination to which the take is intended.
If you leave this option unchecked, the 'Take' buttons in the NV9648 units do not go
high-tally. Takes are not enabled on the NV9648s when the operator presets a source at
the NV9649.
• Use asterisk for breakaway.
If you check this option, the panel displays source names under breakaway with an
asterisk in the 8th character position.
This feature might not be suitable at some facilities. Therefore it is an option.
• Use category and suffix pages.
If you check this option, the panel uses category pages (with associated suffix pages) to
perform device selection.
If you clear this option, the panel uses category lists to perform device selection.
Further, the panel options section shows different buttons according to whether you
have checked this option.
See Category List, following, for details regarding category list configuration.
See Category and Suffix
configuration.
• Clear Preset Mapping.
If you check this box, all preset mappings (channels, or levels, mapped and tieline
presets) clear at the beginning of each suffix button press.
If you clear this check box, all preset mappings are retained. Note that the most recently
made tieline preset (if one was made) is retained even if the ultimately taken source
does not require a tieline. The tieline is wasted.
Pages, on page 30 for details regarding category page
NV9649
User's Guide
27